Friday, March 29, 2024

Application Of Ultra-Low-Power Converters In The IoT

Rohan Kadam

It is predicted that there will soon be 25 billion permanently-connected sensors to implement the Internet of Things (IoT) in real time. But the challenge is how these devices connected across the globe in different environmental conditions will be powered? In many cases, power from the grid or large batteries to power up these sensors would not be available. In that case, an ultra-low-power converter to step up the power from ambient energy sources seems to be a perfect solution. An ultra-low-voltage converter can be defined as a converter that can boost very low input voltage autonomously without any external power supply. The ultra-low-voltage converter can step up input voltage as low as 20mV.

fig 115
Fig. 1: Energy-harvesting system for the IoT

Energy harvesting power sources get more interesting for supplying ultra-low power sensor circuits instead of batteries as shown in Fig. 1, which looks like an attractive and free option.

However, power management required for each sensor, data-processing units and embedded processors is a critical task, as availability of this free energy is uncertain and very low in power. This article describes a power converter circuit that can be used to step up very low power using a self-oscillating circuit.

System block diagram for energy scavenging using an ultra-low-voltage converter is shown in Fig. 2. In this article, each block (of the block diagram) is modelled in LTspice to observe the results in simulation. Detailed description is given below.

Fig. 2: Block diagram for energy scavenging using ultra-low-voltage power converter
Fig. 2: Block diagram for energy scavenging using ultra-low-voltage converter

Radio frequency (RF) energy, pressure and temperature are some ambient energy sources. These possess very high internal impedance and, hence, produce output in milli-volts. This output can be boosted to 3V to 6V range, which could be used to drive low-power sensors and embedded processors.

- Advertisement -
fig 315
Fig. 3: Ambient energy source model (receiver antenna)

Energy source. RF waves are emitted by TV or radio-broadcasting antennae. These travel very long distances and so can be used for powering remotely-placed wireless sensors. Output of these high-frequency, power-carrying RF waves is found to be as low as 600mV. Ambient energy source model is shown in Fig. 3.

3 COMMENTS

SHARE YOUR THOUGHTS & COMMENTS

Electronics News

Truly Innovative Tech

MOst Popular Videos

Electronics Components

Calculators