- Voice controlled home automation system Block Diagram
- Circuit and working for the voice controlled home automation system
- Software used in the making
- Construction and testing the automation system
- Links for the required files
First, download Bluetalk app and install it on your Android phone. Screenshot of Bluetalk app is shown in Fig. 1. Block diagram of the voice-controlled home automation system is shown in Fig. 2.
Circuit and working of the voice controlled home automation system
Circuit diagram of the voice-controlled home automation system is shown in Fig. 3. The circuit consists of Arduino Mega 2560 board (Board1) for comparing the input string received through Bluetooth with the stored string to give output to digital pin 6 of Board1 to control the relay.
Bluetooth module HC-05 transmits and also receives data serially via Board1 that can be read by the microcontroller (MCU). A relay is used here to control only one appliance, though you can use a multichannel relay board to control multiple appliances. Mega 2560 has 54 digital pins, each of which can be used to control an appliance. The MCU can be programmed to compare the relative strings (speech).
Arduino IDE is used for programming the MCU. For developing Android app, MIT App Inventor is used, as it is easier to use as compared to Android SDK. MIT App Inventor is good for hobby projects and DIY enthusiasts to create small apps for their project-specific use.
Bluetalk.apk app uses Google’s speech-recognition function and transmits the text to the MCU via the connected Bluetooth (HC-05). The .apk code can be read by importing Bluetalk.aia file in MIT App Inventor.
Both .apk and .aia files can be downloaded from the source folder present at the end of the article.
Install Arduino IDE (v1.6.9) in your PC and connect Arduino board (here, Arduino Mega is used but we can use any other Arduino board) to the PC with the help of a serial cable. Choose correct serial COM port of the board and then upload the sketch to the MCU. Disconnect the serial cable from Arduino board and connect to the relay and Bluetooth module HC-05.
Again connect Arduino board to the PC via a serial cable. An LED (not shown here) on Bluetooth module will start blinking rapidly, which means it is not connected. Once HC-05 module is connected via the smartphone, the LED will blink just twice after some delay.
Now, say something on the smartphone and check data on the serial monitor of Arduino IDE. After confirming that you are receiving data from HC-05 module, you are good to go. Make sure you select the appropriate baud rate (9600 here). Next, disconnect the serial cable and connect the relay to the appliance as shown in the circuit diagram.
Construction and testing
A single-side PCB pattern of the voice-controlled home automation circuit is shown in Fig. 4 and its component layout in Fig. 5.
Assemble the circuit on the PCB to minimise time and assembly errors. CON1 is used to connect HC-05 module, CON2 and CON3 are 2-pin connectors used to connect 230V AC mains and load (bulb), respectively. CON4 is used to connect Arduino board (Board1).
Power on Arduino board using a 9V DC battery (or any USB 5V DC power supply) to enjoy wireless control of your home appliances via speech. Upload Bluetalk.ino sketch into Arduino board and install Bluetalk.apk on your Android phone.
- Pair your Android’s Bluetooth to HC-05 module.
- It will prompt you to enter a password.
- Default password is 1234.
- Open the app and connect to HC-05 again.
- Your voice controlled home automation system is ready to work.
Touch ‘Speak’ icon on the app, say ‘Turn On’ in front of your smartphone to turn the appliance on and ‘Turn Off’ to turn it off. Author’s prototype is shown in Fig. 6.
Download PCB and component layout PDFs: click here
Download source folder
Madhav Shyam Lakhera is a Space science enthusiast interested in DIY projects, engineering and research.