Innovation is no longer the preserve of technologists. Everybody is innovating, thanks to community help from sites like Quirky, KickStarter and IdeaConnection. If you have an idea for a useful product, and the know-how to design and develop it, you can easily source the required funds to develop, manufacture and even sell the product. Apart from these, there are industry-funded university labs cum incubators, angel investors, seed funders and mentors who help grow an idea into a product and a start-up to see it through. So today it is true that where there is a will, there is a way! Get inspired yet again, with this month’s set of innovations, to start your own project
Janani Gopalakrishnan Vikram
Shape-changing plastic to drive motors
What’s inside: At molecular level, the active polymers are built of structural elements that undergo changes to their mobility within a very wide temperature range. To transform the nano-level activity into macroscopic movement, some of these structural elements are assigned to an internal scaffold that determines the geometry of the motion and orients the motion. This is the technological basis of the newly-developed polymer actuators, which can change shape many hundreds of times as the ambient temperature goes above or below a threshold value.
The team proved their point by demonstrating a basic heat engine, with the drive element made of temperature-memory polymer. The drive element opens out as it cools and in doing so moves a gear rack that then drives a wheel forward. When it heats up, the drive element contracts and moves the gear rack back the other way. A second element made of the reversible temperature-memory polymer forces the gear rack against the wheel when the rack is moving forwards and releases the wheel when it is moving back. The temperature-memory effect makes it possible to control the rotational speed of the drive unit.
World’s first wireless LED light
What’s inside: The system comprises power plates, connection box, adaptor and special LED lamps. Power plates are connected to the connection box, and from there to the adaptor. One adaptor and connection box can power four power plates. Power plates, which transmit power wirelessly, can be placed on the roof or behind shelves or furniture, at a distance of up to 50 mm from the LED lamps to be lit. Power goes through all non-metallic materials like wood and glass. Wireless energy exists as a small sphere around each power plate, and is absorbed only by the specially-designed LED lamps. The LED lights are generally 1W long-life warm-white 2700k, 100LM, corresponding to a 15W bulb. All Wirefreelight products are CE marked and tested and approved by a certified laboratory.
WeWi’s founders came up with the idea in early 2012, after visiting Ghana on business. Over the next 14 months, they designed Sol—a solar-powered laptop. The first order of around 20,000 units, priced around $300, is likely to ship within the next few months. There have been solar-powered laptops in the past, including one from Samsung that was launched in 2010. However, these devices did not take off as they took too long to charge. WeWi hopes to have overcome these problems with its efficient design.