Thursday, March 28, 2024

Suraksha: Mobile Alarm for LPG Leakage

RoboticWares has developed an olfactory sensor-based LPG detection system that sends SMS alerts to site owners if there is gas leakage when they are away -- JALAJA RAMANUNNI

- Advertisement -

“Suraksha uses a GSM module and the maximum current requirement is 2A. The voltage should be in the range of 3.5V to 4.5V for all kinds of GSM modules. We required a regulator to fix the output to the required level like 3.8V, 4V or 4.2V as per the GSM module. For this, we used an LM2572/6 ADJ voltage regulator. We used 4.2V for our circuit in Suraksha.”

The team used AVR Studio and WINAVR for microcontroller programming and debugging purpose. Since they used a GSM module and the microcontroller, they did not face any trouble in interfacing. All they had to do was learn AT commands for interfacing the GSM module. They have applied for a patent for the entire LPG gas detection device with SMS alert mobile communication system.

Challenges faced

- Advertisement -

RoboticWares had earlier developed a leakage sensor with a buzzer alarm. However, they soon realised a buzzer alarm was of no use in an unoccupied house. The alarm was improvised into an SMS-based feedback system

 [stextbox id=”info” caption=”Sensors that smell trouble”]

RoboticWares developed olfactory sensors to keep track of the amount of LPG in the air. The sensor is an electronic circuit that carries chemicals that react with LPG in the air. Based on this, the electrochemical sensor gives an analogue value output as per the density of the LPG.

Once the amount of LPG reaches 1000 parts per million (ppm), the system turns the alarm ‘on’ and sends alert SMS to the registered mobile numbers. The alarm switches off only when the amount of LPG in the air reduces to a safe level. SMS is sent once again to the mobile numbers after the leakage stops.

[/stextbox]

The first version of Suraksha was developed with an LCD screen and a keypad. For feeding the mobile numbers, the users had to follow certain instructions. In order to simplify the user experience, the team decided to let go of the LCD screen and keypad while creating the SMS feature in the final version. This version lets users register their mobile numbers using the phone’s keypad and screen.
The team also found it challenging to design a power circuit that works properly with all the peripherals. Kumar explains, “When the sensor detects the LPG leak, it sinks in a huge amount of current. At the same time, you have to keep the GSM modem active to send an SMS and buzzer for the audio alarm. Sometimes, the GSM module will not respond properly, and it was a great challenge to work with the power circuits and the noise they generated during active condition.”

When the team looked into it, they found that the voltage regulator was not suitable for this device due to its high current consumption. So they modified it to a new regulator that consumes only 3 amperes.

Making the device affordable for all

Suraksha is currently priced at Rs 4200 with no extra cost for installation. The device has already undergone successful pilot testing at several three-star hotels in Bhubaneswar, Orissa. Now RoboticWares is working on ways to make the device affordable for all Indian homes.

“Since the accidents caused by LPG leakage occur everywhere, we want to make this device cheaper and accessible to rural people,” Kumar reveals.

However, RoboticWares has not been able to find investors or government patronage to realise their dream of commercially producing Suraksha. “We are waiting for a government subsidy to reduce the price of the device and introduce it to all Indian homes,” Kumar concludes.


SHARE YOUR THOUGHTS & COMMENTS

Electronics News

Truly Innovative Tech

MOst Popular Videos

Electronics Components

Calculators