Friday, March 29, 2024

Parametric Test System For Quick Production Of Semiconductor Chips

- Advertisement -

The new device improves test times by more than 10 per cent, which means engineers can reduce downtime and make chips faster

Tektronix, Inc., a worldwide provider of test and measurement solutions, has released the KTE V7.1 software for the Keithley S530 Series Parametric Test System to help accelerate semiconductor chip manufacturing just when the world market needs it most.

- Advertisement -

The emergence of 5G and the growth of IoT has fuelled global demand for semiconductors. Global shortages not only call for increased manufacturing but a faster ability to test new chips being developed. Tektronix’s release of this new testing system can help speed up manufacturing by decreasing test time and thus accelerate the delivery of new chips to market.

The KTE V7.1 includes a new parallel test capability and a unique high-voltage capacitance test option for emerging power and wide bandgap applications. KTE V7.1 improves test times by more than 10 per cent versus KTE V5.8, which means engineers can reduce downtime and make chips faster.

The KTE V7.1 builds upon the improvements in functionality and throughput being made to the S530 system since the release of KTE 7.0. The new testhead design allows flexibility in the use of varying probe cards. The upgraded software and hardware enables single-pass testing and high throughput. When it comes to service, the recently released System Reference Unit (SRU) shortens the calibration time to less than eight hours, meaning they can be completed in one regular working shift. The SRUs can be purchased directly or with an annual SSO service plan.

Significant Enhancements

  • Parallel Test Capability Further Improves Productivity and Lowers the Cost of Testing

Made available for the first time as an option on the KTE V7.1 release, the S530 now features a powerful parallel test option that further improves productivity and lowers testing costs with an anticipated 30 per cent improvement range (depending on tests and structures). Built on the S530’s unique hardware architecture that enables up to eight high-resolution SMUs to connect to any test pin through any fully Kelvin port/row in the system, Keithley’s parallel test software optimizes the efficiency of all system resources to maximise test throughput.

  • Unique High-voltage Capacitance Test Capabilities for Emerging Power and Wide Bandgap Applications

Today’s engineers need to test high-voltage devices. There is a growing demand for chips with faster switching speeds and more efficient switching. Greater efficiency not only reduces power use and heat, but it is also better for our environment. To test these wide bandgap devices at their higher operating voltages, engineers are moving from the R&D lab into fabrication. With the release of KTE V7.1, the High Voltage Capacitance Voltage (HVCV) special option is a unique offering in combination with the industry’s only single-pass testing solution that can measure between 200 and 1000 volts, providing the ability to test capacitance up to 1100 V DC bias. This production-ready capability enables precision measurement of Cdg, Cgs, and Cds to support characterisation and test of a power device’s input and output transient performance.

  • Test Up to 1100 V on Any Pin with a Single Probe Touchdown 

In addition to sourcing and measuring up to 1100 V, up to two 2470 SMUs can be configured in an S530-HV system, and the high voltage switch matrix inside the S530-HV enables the user to perform these measurements on any test pin at any time. This provides maximum flexibility to meet the pin-out requirements of a wide mix of test devices and structures while eliminating the throughput delays and higher costs associated with two-pass testing or dedicated pin approaches.

“Today’s emerging analogue, wide bandgap (SiC and GaN) and power semiconductor technologies require parametric testing that maximises measurement performance, addresses a wide product mix and minimises cost,” says Peter Griffiths, general manager, Systems & Software at Tektronix. “Our customers will enjoy the enhancements of KTE V7.1 that will enable engineers to continue to design innovations at an unprecedented pace to meet demands of the changing markets.”

S530 Series Parametric Test System is now available worldwide from Tektronix.


SHARE YOUR THOUGHTS & COMMENTS

Electronics News

Truly Innovative Tech

MOst Popular Videos

Electronics Components

Calculators