Self Driving Cars Platform and Their Trends (Part 1 of 2)

V.P. Sampath is a senior member of IEEE and a member of Institution of Engineers India. He is currently working as technical architect at AdeptChips, Bengaluru. He is a regular contributor to national newspapers, IEEE-MAS section, and has published international papers on VLSI and networks

2789
 
Autonomous vehicles
Fig. 3: Autonomous vehicles

For the vehicle to know where it is in relation to other objects on the map, it must use its GPS, inertial navigation unit and sensors to precisely localise itself. GPS estimates can be off by many metres due to signal delays caused by changes in the atmosphere and reflections off nearby buildings and surrounding terrain, and inertial navigation units accumulate position errors over time. Therefore localisation algorithms often incorporate maps or sensor data previously collected from the same location to reduce uncertainty. As the vehicle moves, new positional information and sensor data are used to update the vehicle’s internal map.

Obstacle avoidance

A vehicle’s internal map includes the current and predicted location of all static (buildings, traffic lights and stop signs) and moving (other vehicles and pedestrians) obstacles in its vicinity. Obstacles are categorised depending on how well these match with a library of pre-determined shape and motion descriptors.

The vehicle uses a probabilistic model to track the predicted future path of moving objects based on its shape and prior trajectory. For example, if a two-wheeled object is travelling at 60 kilometres per hour versus 15 kilometres per hour, it is most likely a motorcycle and not a bicycle, and will get categorised as such by the vehicle. This process allows the vehicle to make more intelligent decisions when approaching crosswalks or busy intersections. The previous, current and predicted future locations of all obstacles in the vehicle’s vicinity are incorporated into its internal map, which the vehicle then uses to plan its path.

Path planning

The goal of path planning is to use the information captured in the vehicle’s map to safely direct the vehicle to its destination while avoiding obstacles and following the rules of the road. Although vehicle manufacturers’ planning algorithms will be different based on their navigation objectives and sensors used, the following describes a general path-planning algorithm that has been used on military ground vehicles.

The algorithm determines a rough long-range plan for the vehicle to follow while continuously refining a short-range plan (for example, change lanes, drive forward ten metres and turn right). It starts from a set of short-range paths that the vehicle would be dynamically capable of completing, given its speed, direction and angular position, and removes all those that would either cross an obstacle or come too close to the predicted path of a moving vehicle. For example, a vehicle travelling at 80 kilometres per hour would not be able to safely complete a right turn five meters ahead, therefore that path would be eliminated from the feasible set.

Remaining paths are evaluated based on safety, speed and time requirements. Once the best path has been identified, a set of throttle, brake and steering commands are passed on to the vehicle’s onboard processors and actuators. Altogether, this process takes on average 50 milliseconds. It can be longer or shorter depending on the amount of collected data, available processing power and complexity of the path-planning algorithm.

The process of localisation, mapping, obstacle detection and path planning is repeated until the vehicle reaches its destination. Currently, vehicle sensor data exists in multiple different formats across automakers. Pooling analogous vehicle data from millions of vehicles will be a key enabler for highly- and fully-automated driving, ensuring that each vehicle has a near-real-time view of road conditions and hazards, which can lead to better driving decisions.

The development is on for required location where Cloud technology that can detect and process changes in the real world as these happen, including on roads in dozens of countries, on an industrial scale and in high quality.

If a car around the next corner hits the brakes because there is an obstruction, that information could be used to signal to the drivers behind to slow down ahead of time, resulting in smoother, more efficient journeys and a lower risk of accidents. Standardised vehicle data exchange will enable the crowd-sourcing paradigm to spread across the fragmented automotive ecosystem, leveraging the synergies between connectivity and sensor data to provide smart mobility services such as real-time traffic, weather and parking spaces in the short term, while holding the promise to power self-driving cars with critical high-accuracy real-time mapping capabilities in the future.

ERTICO – ITS Europe includes in particular Advanced Driver Assistance Systems Interface Specifications (ADASIS), a forum that defines how maps connect and interact with the advanced driver assistance systems of a car.

Part 2 of the article will cover Lidar, GPS modules, MEMS devices and a distributed solution used for self-driving cars, next month.


 

 

SHARE YOUR THOUGHTS & COMMENTS

Please enter your comment!
Please enter your name here