First shown at CES 2016, Etos is a BMW i8 with an auto-pilot and a drone onboard. Frank M. Rinderknecht, boss of the Swiss creative think-tank Rinspeed, intends to use the UFO-esque drone on board Etos for performing services such as picking up deliveries from stores as the car drives you home, while you relax with a book in the driver’s seat. Drone applications have definitely gone way beyond their initial use as aerial torpedoes, unmanned weapons platforms and surveillance.
Financial benefits look very promising for developers of well-engineered drones. In a recent Forbes article by Baldwin Cunningham, it was said that the drone economy could be as incredible as the app economy we had seen in the last decade. To engineer drones that can handle next-generation applications, let us take a look at the technologies available for you.
As an example, a motor and propeller combination that delivers 500 grams of thrust in a quadcopter configuration would be able to barely lift a two-kilogram drone. This is not an ideal situation and so it is recommended that the weight of your drone be less than half the maximum thrust your configuration is capable of delivering.
Direct current (DC) brushless motors are the most commonly used ones here. The Kv rating you find in these motors signify revolutions per minute per volt. A motor rated at 1000Kv will spin 1000 times per volt when there is no load attached to it. This is just a theoretical value, so it is not recommended to test your brushless motor without a load on it. To control speed, you can increase or decrease the voltage applied to the motor.
Electronic speed controllers (ESCs) are devices that let you control revolutions per minute (rpm) of the motor reliably. These devices are able to handle the maximum current the motor might consume at the exact voltage as required by the user. Most motor manufacturers offer their own ESCs.
Some of the popular motors in the market are the ones by Lynxmotion, TMotor, DJI and Storm. You need not look at motor brands; you should be fine as long as the specifications match your rpm and thrust requirements. Some expensive motors we came across come with better ball bearings that promise longer life and more reliability. For example, MN3508 motor built for aerial-photography drones comes with ball bearings that are twice the standard size seen.
Trying to make some sense
Without proper input to the drone (or its pilot), your drone is not going to reliably fly anywhere. There is quite a wide range of sensors that you can choose from to allow your drone to make sense of its surroundings.