Friday, April 26, 2024

How to build a millivolt signal conditioning circuit with compensation?

Tagged: ,

Viewing 1 post (of 1 total)
  • Author
    Posts
  • November 25, 2023 at 9:46 am #130819
    anoop_ambalakkandy
    Participant

    I want to build a miniature circuit which perform the following:
    1. Measure a voltage signal between 0-20 millivolt DC signal
    2. Measure a voltage signal between 0-24 V DC signal
    3. Calculating a compensation factor as K = a Constant/voltage measured at step2
    4. Multiply the compensation factor K with millivolt signal of step1
    5. Transmit value got in step4 as standard 4-20Ma[500 Ohm] /RS485 signals
    I want the circuit to be made on a single board with ICs [as tiny as possible].
    Thank you.

  • Author
    Posts
Viewing 1 post (of 1 total)
  • You must be logged in to reply to this topic.
Electronics For You

Network Consists of Further Focused Websites (Channels)

Inspired by our flagship publication

Electronics For You

South Asia's Most Popular Electronics Magazine Magazine

CHECKED OUT
EFY EXPRESS?

Free e-zine with select content and advertisements of Electronics For You. Magazine

© Copyright 2024 - EFY Group© Copyright 2022 - EFY Group

Html code here! Replace this with any non empty raw html code and that's it.