The new generation of high voltage power modules provides 600 W of output power with 93% efficiency for power conversion applications on defense platforms, tethered UAVs, and unmanned underwater vehicles.

There is a growing need for high voltage power conversion in military/aerospace applications, where minimizing cable losses, maximizing power density, and providing reliable performance in harsh environments is critical. To meet such requirements, SynQor has unveiled two full brick DC-DC converters namely MCOTS-C-270-800-FT and MCOTS-C-270-1000-FT in its MIL-COTS 270 V DC portfolio.
These new converters handle a wide input voltage range of 155 V DC to 425 V DC and produce regulated output voltages of 800 V DC and 1000 V DC, respectively. These are based on the technology of isolated, fixed frequency synchronous rectification technology and are expected to provide a combination of high efficiency, density of power and small power electronics footprint on military platforms.
Both converters offer an output power capability of up to 600 W. The MCOTS-C-270-800-FT converter offers an output current capability of 0.75 A at 800 V DC while the MCOTS-C-270-1000-FT converter offers output current capability of 0.60 A at 1000 V DC. Their output voltages can be adjusted by −20% to +10% of their nominal value.
The key features are:
- 155–425 V DC input voltage range.
- Regulated 800 V DC and 1000 V DC outputs.
- Up to 600 W output power per module.
- Up to 93% full-load efficiency.
- Full-power operation at 100°C baseplate temperature.
There is an efficiency of 91 percent at half load and 93 percent at full load, resulting in minimal loss of energy while functioning. Enclosed converters can generate full rated power even when the temperature of baseplates is as much as 100°C using 270 volts DC as an input voltage source.
These converters have been designed specifically for use in military applications such as tethered UAVs and UUVs. High voltages from these converters are useful in lowering currents needed for the transfer of power through cables.With regard to systems protection and integration, these modules feature output current limiting, undervoltage lockout, overvoltage shutdown, and thermal shutdown. Other features include synchronization startup, active current sharing, external clocking for minimizing electromagnetic interference (EMI), and remote sensing for taking care of voltage drop through cables. These converters meet the following standards: MIL-STD-704 (A–F), MIL-STD-461 (C–F) and MIL-STD-810G. These standards pertain to the power input, EMI, and environmental aspects of military equipment.
Click here for the original announcement.





