Can ultrasonic sensing improve residential gas measurement? A different approach to measuring gas flow could help reduce pressure loss and power consumption.

ScioSense have launched the UFM-G01 – a gas flow measurement module using ultrasonic technology for G4-class residential gas meters. This allows users to replace traditional thermal and mechanical methods of measuring gas flow by using ultrasonic signals.
The module has two ultrasonic transducers located inside the pipe. This emits ultrasonic pulses. The time difference gives an indication of the volumetric flow rate. The module improves efficiency by decreasing any pressure loss within the flow and allows users to measure different gas types.
Designed for battery-powered applications, the UFM-G01 operates between 3.2V and 5.5V, with typical energy consumption of 262mAh per year. Its pulse frequency can also be adjusted through software to reduce power consumption further. The module measures gas flow with an accuracy of up to ±1.5% and supports flow rates from 16 to 7200 litres per hour.
The all-in-one module integrates pressure and temperature sensors and measures transient and cumulative flow rates, gas temperature, gas pressure and speed of sound. It supports air and methane (CH4), with a pressure measurement range of 260 to 1260hPa and pressure loss of less than 150Pa. Its operating temperature range is -20°C to +50°C.
With minimal contact between the sensing technology and the gas stream, the module is designed for a service life of up to 15 years. Its plug-and-play design supports UART communication with a host device, while ScioSense can customise the module for specific customer requirements.
“We believe that the UFM-G01, combined with its very competitive price point, will be a go-to module for most residential gas sensing requirements,” says Andreas Blocherer, Senior Product and Marketing Manager at ScioSense.
The module is also intended for small commercial gas distribution systems, gas burners and boilers, and low-flow gas leakage detection applications.
Click here for the official announcement.





