Metal Foam Cuts Crash Severity In Vehicle Simulations

Computer models show that steel composite metal foam could reduce crash severity and head-injury risk, although physical crash testing is still needed.

Cutaway view of a car's front crash rails filled with composite metal foam, illustrating a simulated vehicle safety design.
Composite metal foam-filled crash rails could reduce impact forces in computer simulations. (AI illustration)

Front rails are designed to deform during a frontal collision, absorbing impact energy and slowing the vehicle’s deceleration before it reaches the passenger compartment. Researchers at North Carolina State University have used simulations to test out a design that includes composite metal foam (CMF) and have discovered that it has great potential for enhancing crashworthiness. In a simulation of an impact at 89 kilometers per hour, peak deceleration is decreased by 84 per cent with the foam-filled design.

The material consists of hollow stainless-steel spheres embedded in a stainless-steel matrix, with air trapped inside the spheres. The researchers, Professor Afsaneh Rabiei and postdoctoral researcher Aman Kaushik, modelled an aluminium 6061 alloy double-tube structure containing a steel CMF core. Its performance was compared with two conventional front-rail designs of equivalent mass and length: a hollow rectangular high-strength low-alloy steel rail and a double-octagonal aluminium rail.

Compared with the double-octagonal design, the CMF-based rail reduced maximum deceleration by about 38 per cent, overall crash severity by 45 per cent and the Head Injury Criterion (HIC) by 45 per cent. Against the rectangular steel rail, the reductions were approximately 84 per cent, 94 per cent and 83 per cent, respectively. HIC is a measure used to assess the risk of head injury during an impact.

The simulations also indicated that vehicles using CMF-based rails could travel faster before reaching critical safety limits. Compared with the double-octagonal design, the modelled impact speed could increase by 33.73 per cent before reaching the critical crash-severity limit and by 39.50 per cent before reaching the HIC limit. Compared with the rectangular rail, the corresponding increases were 31.93 per cent and 48.24 per cent.

The researchers suggest that the material could allow shorter front rails without compromising safety, although this has not been demonstrated in a physical vehicle. Its resistance to heat and fire, established in earlier research, could also make it useful in structures designed to protect electric vehicle battery packs. However, the current study relies on finite-element simulations based on earlier experimental data for CMF and publicly available material and design data for conventional rails.

The study reports no physical crash tests of the proposed rails. The researchers say they are open to working with automakers and suppliers to test the structures in existing vehicle designs or develop new ones. Rabiei is the inventor of CMF and has assigned related patents to a small business in which she holds a shareholding.

For more information, click here. 

Loading form…
Ananthu Ashok
Ananthu Ashok
Ananthu Ashok is a tech journalist and has a deep interest in embedded systems, open source, IoT, robotics and emerging tech.

SHARE YOUR THOUGHTS & COMMENTS

Latest DIY Projects

Electronics News

Truly Innovative Electronics

Electronics Components

Electronics Jobs