APPLY HERE
Location: Chennai
Company: Stellantis
Wiring System Engineer (HV and LV Harness)
Qualification, Experience and Competency requirements:
Preferred Education
- B.E./ B. Tech in Electrical/Electronic/Automotive/mechanical Engineering with 4+ years Automotive Industry experience
Roles & Responsibilities (Not limited to)
- Lead Ground Topology Overview for Ground Points, Circuit Names, Device Names, Definition of Dirty/Clean
- Wiring Harness Architecture
- Lead Network Topology for CAN-BH/C, Devices, Harness Family, creating Network Topology, CAN Block P/N’s and get network approval from STLA network team.
- Lead for Hi-Current Functionality by creating High Current Topology, 8mm+ wires, devices, wire sizes, wire types, wire length and resistance check to meet system requirements
- Lead Device Topology by creating and maintaining device topology in Visio.
- Lead in creating and maintaining inline topology
- Lead in reviewing with PDC Fuse tree engineers (STLA)
- Lead in creating and maintaining bulletin tracker, determine bulletin effect, provide systems impact to PC and supply bulletin tracker to DR.
- Lead in Developing the Complexity Chart
- Lead in creating and maintaining device transmittal / Interface tracker (Fink list) through SYNC 3 and provide list to PC/DL/DR for program reviews and PMT.
- Ensure Device Transmittal / Interface completeness/accuracy, Loads, Special Requirements, Terminal plating, connector p/n, pinout, One-ended circuit check, Yellow connector check, obsolete connector check, disassociate device Interface from other carlines and interface sign-off
- Maintain DTCR / Interface tracker (after Release 1A close), provide tracker data for Program Reviews to PC/Systems DR/DL.
- Meet with PC, CoC to obtain Interface / DTCR approvals.
- Lead for Sales-code device pins by assigning device pins with feature codes.
- Lead for Inline by creating and submitting CSR forms to CoC, creating inline list file (X/Y-NUMs, Male/Female, connector p/ns, description, etc), Approve inline pinouts and creating inline device transmittal (add special requirements and terminal plating).
- Lead for Wire Gauge Selection by providing initial wire sizing and approving the final wire size.
- Lead for EE Systems Design Reviews by reviewing subsystems.
- SDP / Schematics design in Logics.
- HV Cable Circuit design on 2D: Logical and Physical.
HV 2D Drawing: Knowledge about General Standard Guidelines, Packaging guidelines and safety guidelines for transporting, precautionary steps for laying onto vehicle.
