Wednesday, October 9, 2024

Highly Integrated Point-of-Load Converter For Space Applications

- Advertisement -

The device is space qualified and is equipped with high absolute maximum supply rating for greater efficiency

This QML-V qualified 7A Point-of-Load (PoL) DC-DC converter enhances the range of radiation-hardened (rad-hard) integrated power products that deliver high power efficiency to satisfy the most demanding space applications.

The RHRPMPOL01 is a complete PoL converter, including N-channel power MOSFET and bootstrap diode, with under-voltage, over-voltage, over-temperature and adjustable over-current protection in a compact Power FLAT-28A hermetically sealed ceramic package, which has a low junction-to-case thermal resistance that maximises power dissipation.

- Advertisement -

The qualified device, Standard Microcircuit Drawing (SMD) 5962-28208, is Radiation Hardness Assured (RHA) up to 100krad(Si), and Single Event Latch-up (SEL) and Single Event Snap-Back (SESB) free up to 70Mev.cm2/mq. Single-event upset (SEU) and single-event functional interruption (SEFI) are characterised at 7V operating voltage. 

Ideal for demanding loads

The RHRPMPOL01 allows both synchronisation and current sharing, making it an ideal companion chip to the most demanding loads such as FPGAs, microprocessors and ASICs. The synchronisation feature allows dephasing multiple PoLs to minimise both the peak current of the application boards and the output ripple, ensuring high accuracy. Synchronised devices can operate with independent outputs for loads that require different voltage levels or with tied outputs to supply high-current loads

With a high absolute maximum supply rating of 14V, the RHRPMPOL01 converts an input voltage in the range 3.0V to 12V to an output voltage that can be set from 0.8V to 85 per cent of the input voltage value. The 0.8V minimum output allows the converter to provide power for advanced devices that operate at low supply voltage.

Simplified power sequencing

Based on peak-current-mode control, the RHRPMPOL01 is easily stabilised using external components and ensures fast load-transient response. The switching frequency is programmable from 100kHz to 1MHz, while both programmable soft-start duration and delay allow designers to limit the inrush current. An Enable pin simplifies power sequencing and a Power-good pin provides real-time information on the output-voltage status.

Leveraging ST’s BCD6s SOI process technology, which provides proven resilience against single-event effects, the RHRPMPOL1 has been developed with the support of the European Space Agency (ESA) and the French Government Space Agency, CNES.

The RHRPMPOL01 is in production now and is supported by a comprehensive ecosystem that includes the EVAL-RHRPMPOL01 evaluation board and user guide, PSpice models, and documentation including radiation reports. They can be obtained from STMicroelectronics.


SHARE YOUR THOUGHTS & COMMENTS

EFY Prime

Unique DIY Projects

Electronics News

Truly Innovative Electronics

Latest DIY Videos

Electronics Components

Electronics Jobs

Calculators For Electronics