DIY LED Chaser Circuit with Tune Generator Using NE555
IC1 (NE555) is used here as a clock generator. It is configured as an astable multivibrator whose frequency can be adjusted with the help...
SHORT WAVE TRANSMITTER
This transmitter circuit operates in shortwave HF band (6 MHz to15 MHz), and can be used for shortrange communication and for educational purposes.
The circuit...
Protect Your Appliances with This Over/Under Voltage Cut-Out Circuit
This over/under voltage cut-out will save your costly electrical and electronic appliances from the adverse effects of very high and very low mains voltages.
The...
DIY 7MHz CW/AM QRP Transmitter Circuit
The circuit of a 7MHz C W / A M QRP transmitter described here can be used to transmit either CW or audio frequency...
Automatic Lamp Brightness Control Circuit
The circuit described here can be used for controlling a decorative lamp from zero intensity to maximum intensity in a specified time. Typical applications...
Simple High-Sensitivity Temperature Switch
This temperature switch has high sensitivity and is quite reliable. Here, in place of a single transistor, a Darlington pair has been used for...
CLAP SWITCH
Here’s a clap switch free from false triggering. To turn on/off any appliance, you just have to clap twice. The circuit changes its output...
Connect Two Telephones in Parallel with Intercom Functionality
The circuit presented here can be used for connecting two tele phones in parallel and also as a 2-line intercom.
Usually a single telephone is...
DIY Bi-Colour LED Dancing Light Circuit with 555 Timer
The circuit as shown in the figure employs 14 bi-colour (red and green) LEDs having three terminals each. Different dancing colour patterns are produced...
DIY Extra Telephone Ringer with Visual and Audio Alerts
Many a times one needs an extra telephone ringer in an adjoining room to know if there is an incoming call. For example, if...