For this project let’s build a water fuel converter/generator that uses electricity to convert water into an extremely powerful fuel! Here’s how to build an Oxy-Hydrogen generator from scratch.
Courtesy: Grant Thompson – “The King of Random”
Water fuel converter
An oxy-hydrogen generator uses electricity from a powerful battery to split water into hydrogen and oxygen gasses.
2H2O (apply electricity) => 2H2 + O2
Together, these make a fuel that is much more powerful than gasoline and the only emission released is water.
For this project, you need some stainless steel and some ABS pipe fittings. This project uses, 12 plates measuring 3″ x 6″, 4 plates at 1-1/2″ x 6″, and three 1″ connector bands that were 6″, 4-1/2″, and 3 1/4″. A belt sander was used for smoothing down the jagged edges around the hole.
The plates are joined in a configuration so that the 2 inner plates are connected to one electrical terminal, and the 2 outer plates connected to the other terminal. Plastic rods, plastic washers, and stainless steel nuts help to form the proper electrical connections.
The generator plates are assembled in the order of plate, plastic washers, plate, stainless steel jam nuts until 8 plates have been connected.
Feel interested? Check out other electronics projects.