How can multiple robot cameras capture moving objects in sync? An image sensor aims to combine global-shutter imaging, external triggering and near-infrared sensitivity.

Kaimou Semiconductor has launched the GS2.3 global shutter CMOS image sensor with 2.3-megapixel resolution for robot cameras, machine vision and bar code readers. With an image resolution of 1920 x 1200 pixels, it can provide frame rates of up to 120 fps to capture moving objects without distortion.
The GS2.3 includes external FSYNC triggering to allow multiple cameras to be triggered simultaneously. The device can be used in free running master mode.
The GS2.3 is available in monochrome and RGB versions. It uses a 1/2.6 inches optical format and has a pixel size of 3µm. The monochrome version provides high quantum efficiency of 44.6 percent (850nm) and 24.9 percent (940nm). The device can provide RAW8, RAW10 and YUV422 output using MIPI CSI-2.
The device provides automatic exposure control and automatic gain control. Black level, defective pixel, lens shading correction, gamma correction, sharpening and noise reduction are also available. Scaling, windowing and up to 4 regions of interest can also be performed.
The GS2.3 requires a nominal 1.2V digital supply. In 120fps mode, the supply voltage will increase to 1.5V. The device will consume 331mW of power in active mode whilst running at 120fps with a 4 lane MIPI interface. The device is supplied in a chip scale package, measuring approximately 8.02 x 5.40mm.
Samples are expected to be available in Q4 2026 at around $45. Volume production will start in Q2 2027. Camera modules and evaluation boards are available from partners using Raspberry Pi 5 and Luckfox Aura.
Click here for the official announcement.





