The integration of an inertial sensor suite makes use of six degree of freedom MEMS sensing and on-chip processing to make orientation sensing simple and reduce computational burden for the host computer.

There has been a growing need for motion sensing applications using intelligent IMUs that combine sensing and processing functionality for applications in industrial automation, robotics and autonomous control systems. The SCI36LT Series includes the SCI36LT-K01 and SCI36LT-K02 models, which make use of six degree of freedom (6-DoF) MEMS sensors along with an on-board MCU.
The series was invented by Murata Manufacturing, providing greater proximity between the location of sensor data processing and the sensor itself. This results in the decreased load on the host processor and simpler integration of the system. Contrary to typical IMUs, where sensor fusion and orientation computations are carried out by the external processor, this design allows executing such functions in the sensor itself.
The two models are intended for different needs. The first one, SCI36LT-K01, is a ready-made solution, equipped with the sensor fusion algorithm, developed by Murata itself. The algorithm computes pitch, roll, and relative yaw angles. It includes the gyroscope with the ±490°/s measuring range and accelerometer up to ±16 g. Orientation data can be provided both in the form of Euler angles or direction cosine matrix (DCM).
The key features are:
- Six-degree-of-freedom inertial sensing architecture.
- Integrated embedded MCU for sensor-side processing.
- Configurable sensor fusion and output data rates.
- Module-level calibration support.
- Compact 11.2 × 9.2 × 2.9 mm package.
The SCI36LT-K02, on the other hand, gives users the benefit of an open software development platform, utilizing the same architecture for sensor integration and data processing. Developers can program the embedded MCU with application-specific software for customized processing without necessarily relying on the host device.
Applications of the SCI36LT series include grading control for heavy equipment and excavators, dynamic inclination measurement for construction equipment, RTK position measurement for surveying equipment, humanoid robots’ motion sensors, and drones for agricultural purposes. The SCI36LT-K01 comes with calibration features that facilitate compensation at the module level after integration within the end system In a land grid array (LGA) package, the devices measure 11.2 x 9.2 x 2.9 mm, incorporating MEMS sensor integration, MCU, passive components and crystal resonator. The devices run on a supply of 3.1V to 5.5V from −40°C to +85°C.
Click here for the original announcement.




