The compact actuator allows you to add vibration alerts to smart rings, hearables and other small electronic devices.

Vybronics has launched a VG0415001W-240H linear resonant actuator (LRA), a coin-type haptic vibration motor. The motor is suitable for space-constrained wearables like hearables and smart rings. The company claims that the LRA has the smallest diameter compared with any other coin-type LRA vibration motor on the market. The motor is 4mm in diameter, 1.5mm thick and weighs only 0.1g.
The device can produce measurable vibrations even when carrying a load heavier than that of a typical smart ring. This is relevant when evaluating its ability to provide vibration-based alerts or feedback in wearable devices. The LRA operates at a resonant frequency of 240Hz, with an input range of 0.1 to 0.42Vrms. The rise time of the actuator is stated as 40 milliseconds (0.04 seconds), and the fall time is 60 milliseconds (0.06 seconds). The actuator cannot normally be driven directly by a basic microcontroller output. It requires an LRA driver IC, which supplies and controls the AC signal needed to operate it.
The actuator can be connected using a flexible circuit or small wires and fitted into lightweight products weighing up to 10g. It allows manufacturers to add vibration alerts to smart rings, hearables and other compact electronic devices. For example a smart ring company can include this actuator, inside the ring’s structure. When the user gets a phone call the actuator makes vibrations to let them know. In this way a hearable company can use it to give vibration alerts instead of depending completely on sound notifications.





