STMicroelectronics has introduced two 36V opamps that deliver enhanced performance and ruggedness in automotive and industrial applications. The op amps feature a wide supply-voltage range, stability in challenging operating conditions, and tolerance of electrostatic discharge (ESD) up to 4kV (HBM).
The TSB572 and TSB611 single opamps are the first devices produced using ST’s new 40V-ready BiCMOSsemiconductor process. This technology delivers superior GBW/Iccefficiency resulting in about five times lower supply current in relation to performance, compared with standard opamps. In addition, low input-offset voltages with temperature drift below 6µV/°C simplify system design, eliminate any need for trimming or calibration, and ensure consistent performance over the specified temperature range -40°C to 125°C.
The TSB572, with rail-to-rail inputs and output, has 2.5MHz gain-bandwidth (GBW) and 1.5mV maximum input-offset voltage. The opamp is stable with capacitive loads and highly resistant to phase reversal. Its broad supply-voltage range, from 4.0V to 36V, allows reliance on specified parameters with a wide variety of power supplies.
The TSB611 has 560kHz GBW and can operate from a supply voltage as low as 2.7V. It is aunity-gain-stable device, and has extremely low input-offset voltage of 1mV as well as frugal operating current of 125µA (max.) at 36V.
Compact package options make ST’s new opamps ideal for use where space is tight, such as in automotive audio systems and Electronic Control Units (ECUs).
The TSB572 is in mass production now in 3mm x 3mm DFN or Mini-SO8, priced from $0.80. The TSB611 in SOT23-5 is also in mass production, priced from $0.55 for orders of 1000 pieces.