How can high-voltage power designs use fewer capacitors without adding complexity? Higher-rated components offer one way to reduce space, cost and potential failure points.

Vishay Intertechnology has extended its 259 PHM-SI series of snap-in power aluminium electrolytic capacitors with 550V and 600V ratings. The higher ratings address a design challenge in high-voltage power systems, where engineers have traditionally needed multiple capacitors connected in series to support DC bus voltages between 800V and 1100V.
By putting three capacitors of 400-450V in series additional resistors must be added in order to balance the voltage and increase potential points of failure. The increased ratings allow the series of capacitors to be reduced, removing or simplifying balancing circuitry within the design. This reduces BOM cost. This can reduce the number of components used and therefore reduce the PCB footprint in power conversion applications in EV charging, Industrial Motor Drives, Renewable Energy Inverters, UPS and Medical Equipment.
The higher voltage ratings also provide greater voltage headroom, which can help improve system lifetime and reliability. The capacitors combine high capacitance with compact case sizes, giving designers more flexibility when working with limited board space. Available configurations include 330µF at 550V and 600V in a 35mm × 45mm case, and 470µF at 550V and 390µF at 600V in a 35mm × 55mm case.
The devices offer ripple current ratings from 2.14A to 2.58A for these configurations, supporting the switching currents found in high-power converters. They have a useful life of more than 3,000 hours at 105°C and are specified to provide more than 10 years of operation at ambient temperatures up to 60°C. The series is rated for operation from -40°C to +105°C.
Click here for the official announcement.







