APPLY HERE
Location: Bengaluru
Company: Bytebeam
This is a hands-on role for someone who is excellent with a soldering iron, comfortable with test instruments, can read schematics and board files, and can debug failures down to the component.
What You’ll Do
Soldering and Rework
- Perform hand soldering and SMD/through-hole rework on PCBs, including fine-pitch components, connectors, and wires, to a clean, reliable standard.
- Build, modify, and repair prototype and production boards, including blue-wire mods and component swaps during debug.
Component-Level Debugging
- Debug board and device failures down to the component level, and help find root cause.
- Use schematics and Gerber / PCB layout files to trace nets, locate components, and probe the right test points.
- Isolate faults across power, analog, digital, and communication sections with guidance from the engineers, and document findings clearly.
Test and Measurement
- Use multimeters, oscilloscopes, power supplies, and bench test setups / jigs to measure, verify, and characterize device behavior.
- Set up and run test fixtures, and capture and log measurements for the team.
End-of-Line Assembly and Test
- Support end-of-line (EOL) assembly and test for telematics devices: assemble units, run EOL test sequences, and flag and segregate failures.
- Help build, set up, and improve EOL and functional test jigs, and keep them running on the line.
Field and Integration Support (Travel)
- Travel frequently to plants, test locations, and customer sites to support production builds, validation, and device integration.
- Set up test benches on site, support installation and integration of devices into vehicles/systems, and help debug issues found in the field.
- Be a reliable pair of hands and eyes for the engineering team wherever the hardware is.
General
- Maintain tools, instruments, ESD-safe practices, and a clean, organized work area.
- Keep clear records of rework, test results, failures, and field observations.
Must-Have Skills
- ITI / Diploma in Electronics, Electrical, or related (or equivalent hands-on experience)
- 2+ years hands-on as an electronics/hardware technician (production, test, lab, or field)
- Strong hand soldering and SMD/through-hole rework skills, including fine-pitch work
- Ability to debug component-level failures and trace faults on a board
- Ability to read schematics and Gerber / PCB layout files
- Hands-on with multimeters, oscilloscopes, and bench test setups / jigs
- Familiarity with end-of-line (EOL) assembly and functional test
- Willing and available to travel frequently to plants, test, and customer locations
- Careful, methodical, ESD-aware, and good at documenting what was done and observed
Good-to-Have (Strong Plus)
- Experience with automotive or telematics hardware (cellular/GNSS/CAN/OBD devices)
- Experience setting up or maintaining EOL / functional test jigs and fixtures
- Exposure to flashing/programming devices and basic firmware-level checks
- Experience with field installation or integration of electronic devices in vehicles
- Familiarity with reading test logs, basic scripting, or test-equipment automation
- IPC-A-610 / IPC J-STD soldering awareness
Loading form…
