Presented here is a clock generator design using Verilog that
In VLSI domain, while designing Verilog code we also need to design test benches to automate the process of testing. Clock generators are used in test benches to provide a clock signal for testing the model of a synchronous circuit. The clock generator can be used for a number of applications and also for producing symmetric waveforms.
To design the clock generator for a specific application we can design the clock generators using different looping mechanisms available in Verilog language. In Verilog hardware description language, we have different looping statements available. For example, forever loop causes unconditional repetitive execution of statements and simultaneously we need to make use of disable keyword, as it is the method for disabling the clock signal after some time. You need to provide the delay for this.
Software for Clock Generator Project
The following sample code, written in Verilog, produces symmetric waveforms using simulation. There are a number of simulation tools available; we have used ModelSim SE edition by Mentor Graphics. In the following code you would see that forever loop executes until simulation terminates, and it also tells you how the initial behavior may continue for the duration of a simulation without expiring. Disable statement terminates execution after 350 time steps by disabling clk_loop block.
The sample code given below is for understanding the concept of the clock generator.
[stextbox id=”info”]//parameter halfcycle=50;
begin: clk_loop // clk_loop basically
contains the block of statements
#halfcycle clk =1;
#halfcycle clk =0;
#350 disable clk_loop;//[/stextbox]
In many situations, loops can be constructed using four basic looping mechanisms, but some specific EDA synthesis tools will synthesise only the for loop.