Hardware Engineer For Motor Controller At Viridian Ingni Propulsion

- Advertisement -

APPLY HERE

Location: Chennai

Company: Viridian Ingni Propulsion

Take ownership of Hardware development for motor controllers.
Develop the system architecture based on requirements & Identify key components for the design.
Design the schematics and review the PCB layout for the Motor controller.
Create and maintain documentation and design collaterals including system architecture, high-level design, low-level design, and physical design.
Release the design for manufacturing; oversee and manage the PCB manufacturing.
Assemble the prototypes using hand assembly; oversee PCBA assembly for high-volume runs.
Create test plans for testing the hardware and system components.
Perform section-wise testing and board bring-up activities on the hardware.
Debug and diagnose the hardware and firmware on the controller.
Integrate with the motor and perform various functional, performance, and reliability tests as per requirements.
Prepare test reports and documentation.

2+ years of relevant experience in Hardware development.
In-depth knowledge of Power electronics concepts and designing, simulating, and analyzing high-voltage and high-current DC and AC systems.
Hands-on experience developing and debugging high-voltage high-current products such as motor controllers, inverters, power supplies etc.
Ability and willingness to take complete end-to-end ownership of Hardware and system design.
Experience in working with real-time microcontroller-based embedded systems.
Require experience in debugging using lab equipment such as Oscilloscopes, Multimeters, Logic Analyzers, signal generators etc.
Previously experienced in testing of motor controllers using high-voltage power supplies, electronic loads, dynamometers etc.
Experience in working with Microcontroller peripherals such as ADC, Timers, Comparators, Input-capture, PWM etc.
Experience with microcontrollers from TI, NXP, STM32, PIC, Atmel (ARM based microcontroller experience is preferred).
Experience with performance and reliability testing including thermal, environmental, EMI/EMC, Electrical stress, HALT/HASS etc. is highly desirable.
Experience with simulation software such as PSpice, PSIM, Matlab, Simulink etc is a plus.
Experience in the automotive or power electronics domain is highly desirable.

Experience: 2 Years